Tyco R/C XFO Instructions Manual page 2

INTRODUCTION
Please read this manual thoroughly for detailed operating instructions and important safety
information.
• The XFO™ vehicle is an advanced-technology vertical-takeoff flying machine with cool features.
It's easy to fly, challenging to master...and lots of fun!
• You will need to assemble your vehicle before use. This is a simple, one-time process (please
see Section II for assembly instructions). This is an advanced flying machine! Assembly is a fun
"science project" you get to play with after it's done.
• This vehicle is powered by a NiMH battery that is permanently installed. The vehicle must be
fully charged before using.
• The vehicle is recharged with a handy Field Charger that can be used at your selected flight
location.
• The Field Charger must be charged at a wall outlet before it can be used to recharge the
vehicle. You will need to charge the Field Charger for at least 16 hours before use (please see
Section III for details). Once the Field Charger is fully charged, it will be able to recharge the
vehicle many times. NOTE: you must disconnect the Field Charger from the vehicle before
operating the vehicle.
I. CONTENTS/FEATURES
1. XFO™ vehicle
(shown fully assembled; please see Section II for assembly instructions)
q Rotor
w Lightweight body
e ON/OFF switch
r Recharging connector (Field Charger plugs in here)
t Landing legs (x4)
2. Field Charger