Tyco R/C Turbo Street Wheelie Cycle Instructions

Keep these instructions for future reference as they contain important information.
IMPORTANT: Please read all "Consumer Information" before operating your vehicle.
GET STARTED!
Your Turbo Street Wheelie Cycle
motorcyle that allows you to pull off outrageous "one touch"
stunts like wheelies and Turbo boost action. Plus, your
Turbo Street Wheelie Cycle
allows for maximum stability for your most radical stunts.
1.GET SET!
Hold the Turbo Street Wheelie Cycle
the right throttle control all the way.
*
Be sure to keep your fingers clear of the wheels at all times.
2.LAUNCH IT!
Gently hand-launch your vehicle. Set it on the ground and give it
a gentle push while rotating the right throttle control.
I. CONTENTS/ FEATURES
• Turbo Street Wheelie Cycle
• Transmitter
VEHICLE
q Rider Figure (not removable)
w ON/OFF Switch
e Battery Latches
r Battery Compartment
TRANSMITTER
NOTE: Your Turbo Street Wheelie Cycle™ uses a unique
transmitter with a sophisticated gravity switch to control your
steering. Just turn your vehicle ON. Then tilt the Ttransmitter
to steer. Tilt the transmitter to the left to turn left, Tilt right to
turn right.
q Forward Control (throttle)
w cool stunts button
e Forward / Light Flash Effects
r Battery Compartment
t Left / Light Flash Effects
y Right / Light Flash Effects
u Antenna
II. QUICK START
Please read this Owner's Manual thoroughly.
1.Start with a full charge.
2.Turn the vehicle switches to on. Rotate the Transmitter
forward control to run and control your vehicle.
3.When you're done driving, turn vehicle ON/OFF to the OFF
position. Remove all batteries for storage.
is a high performance
™
has a specialized stabilizer that that
™
off the ground and rotate
™
Vehicle
™
CAUTION:
and cause burns if electronics get wet. Do not
operate vehicle through water or snow.
1
2
FRONT
1
6
3
2
5
6+
ASST. N4054
P2804/P2805-0920
Surfaces may become hot
4
3
BACK
4
A
B
C
7