Table of Contents
Advertisement
Press
for 2 seconds to enter wavelength auto-identification mode.
right of the screen will display "AU".
acklight control (two modes of back light control; press this key to select):
(3)
B
•
"LDR" indicates the intelligent backlight control mode. Power meter will
activate/deactivate the backlight in 15 seconds based on ambient light. This is the
default mode.
•
Back light control key mode. Press
Saving/Data-View key 。
(4)
Data-saving: can save up to 1000 records.
number. If saving the data, double press
Current saving data
(wavelength,
output
power-dBm)
Data view: Press and hold
the data. Pressing again steps back through saved records.
Handheld Optical Power Meter
Press and hold this key to quit this function.
to turn on/off the back light
. The screen will display the data saving
to confirm
to enter the data view interface. Quickly press
5
Calibrated wavelength
The upper
Wavelength auto-identification
Data Saving No.
to view
Advertisement
Table of Contents
