Top - Wirepath WP-TEST-FIBER-400 Owner's Manual

(2) USB Port。
Use the USB cable supplied to connect the Optical Power Meter to the USB port on PC (fig. 4-5).
。

4.3 Top

(1) Dust Cap
Dust Cap: Place the dust cap over the connectors when not in use to protect the optical connector
(2) Optical Connector。
The standard for this power meter connector is SC & Φ2.5mm.
Note: When changing the optical connector, be careful of the connector and the
end-face. FC connector can connect with FC adaptor; Φ2.5mm universal connector can
connect with FC, SC, or ST adaptor. (Fig 4-9)
For LC testing, utilize included SC to LC reference patch cords and use included LC-type
adaptors for double-ended testing.
Handheld Optical Power Meter
4-5
4-6
9
Mini USB Port
Universal USB(connect with PC)
(1)
(2)