Chapter 4. Function; Front - Wirepath WP-TEST-FIBER-400 Owner's Manual

Chapter 4: Function

4.1 Front

(1)
(2)
(3)
(1) Power Key: Press to turn unit on or off
Power Saving Mode: Quickly press Power Key to activate the Auto-Shut Off. When active, the
unit will automatically shut off after 10 minutes idle time, whether using battery power supply or
AC power supply. In Auto-Shut off mode, "auto-off" will display on the bottom left of the screen.
This power saving setting is the default setting. The power meter will be in this mode when first
turned on. Quickly press the power key to turn off auto power saving mode.
Power Saving (Auto-off)
(2) Wavelength Selection/Wavelength Identification
Quickly press this key to select the wavelength. It will display on the top left of the LCD screen.
1310nm is the default wavelength.
Handheld Optical Power Meter
4-1
4
(10)
(9)
(8)
(7)
(6)
(5)
(4)