Jason.L San Fran System 2 Person Workstation Installation Manual

Size: 1800mm

San Fran System

2 Person Workstation

Size: 1800mm

Tools Required: Power screwdriver.

Special Note: No pre-drilled holes or nut inserts are provided.

Wood screws will be required to be drilled directly into underside of desk top.

www.jasonl.com.au

Call us on

1300 527 665

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the San Fran System 2 Person Workstation and is the answer not in the manual?

Page 1 www.jasonl.com.au INSTALLATION GUIDE San Fran System Need help! Call us on 2 Person Workstation 1300 527 665 Size: 1800mm Tools Required: Power screwdriver. Special Note: No pre-drilled holes or nut inserts are provided. Wood screws will be required to be drilled directly into underside of desk top. Page 1 of 4...
Page 2: Installation Guide
www.jasonl.com.au INSTALLATION GUIDE San Fran System Need help! Call us on 2 Person Workstation 1300 527 665 Size: 1800mm COMPONENTS Leg x4 Adjustable Foot x4 Leg Cable Cover x4 Rail Lengths x2 (1290mm) Rail Widths x2 (620mm) 2 Way Connector x4 2 Way Connector Cap x4 Slot Nut x4 Table Top x2 (1800x800mm)
Page 3: Need Help
www.jasonl.com.au INSTALLATION GUIDE San Fran System Need help! Call us on 2 Person Workstation 1300 527 665 Size: 1800mm Slide the 2 way connectors over each leg, and securely lock into place using Loosely connect the shorter M8x12mm dome head bolt and slot nut through the M8x20mm cap head bolts.
Page 4 www.jasonl.com.au INSTALLATION GUIDE San Fran System Need help! Call us on 2 Person Workstation 1300 527 665 Size: 1800mm Conceal any power cable using the magnetic leg cable covers. Page 4 of 4...