Top Cover - Hamilton Beach SmartServe MIC2000 Service Manual

SmartServe™ Drink Mixers Service Manual

Top Cover

The top cover is located on the top of the machine. Removal of the top cover allows access to
various components of the machine.
To avoid risk of serious injury or death, disconnect power to the machine before
Do not use power tools to remove hardware. Damage to the hardware or the machine
To remove the top cover:
1. Ensure the control panel power switch (1) is in the OFF position and unplug the
machine.
2. Remove two screws (2) from each side of the machine (3).
3. Lift the top cover (4) from the machine (3).
4
Removal and Replacement
cleaning, servicing, or removing parts.
may occur. Do not lose hardware.
1
WARNING
CAUTION
3
2
Page 28 of 92
520008300 08/14