Meaco DD8L Zambezi Instruction Manual page 12


Child Lock
Using your dehumidifier – Other functions and Settings

Happy Zambezi

Sad Zambezi

Memory Function

Turn me on!
HI

Bucket full, time to empty the dehumidifier
Press and hold the Left or Right buttons at the same time for three seconds to turn the Child Lock
on. Press and hold the same buttons for three seconds to turn the function off.
Happy Zambezi appears on the display when the machine is dehumidifying and water is being
collected.
Sad Zambezi appears on the display when the machine is NOT dehumidifying and water is NOT
being collected.
Elephants are known for their excellent memory and Zambezi is no different. When you turn the
machine off using the On/Off button and then turn Zambezi back on he will remember the settings
that you last used and will start up using those functions. The same applies after a power cut,
Zambezi will start to work again just as you left him.
If you press Up/Down/Left/Right all at the same time for 3 seconds '88' will blink on the LCD and all
settings will be lost and you will have reset the dehumidifier to the original factory settings. But if
you turn Zambezi off using the Enter key and then unplug Zambezi then he will default to factory
settings.
If you leave the machine in Standby mode (turned off but still plugged in to the mains) and the
relative humidity goes above 70%rh then 'HI' will appear on the display. This is Zambezi telling you
that you should turn the dehumidifier on because the room relative humidity is too high.
When the water collection tank is full the dehumidifier will bleeper will sound ten times and Zambezi
will turn off. Once you have emptied and refitted the tank then Zambezi will start to work again as
per his previous settings.
12 [EN]