Getting Started - Aerus QuietPure home Instruction Manual

GETTING STARTED

1. Before using your QuietPure Home by Aerus,
remove all air purifier components from the box
and remove packaging.
NOTE: Make sure to completely remove all
packaging from the air purifier and filter
prior to use.
a. Turn the air purifier upside down to access
the filter cover located at the bottom of the
unit.
b. Rotate the filter cover counter clockwise and
remove from the unit.
c. Remove the filter from the unit. Cut, remove
and discard the plastic bag covering the
filter.
d. Place the filter back into the unit.
e. Place the filter cover back on the bottom of
the unit, aligning the locking posts in the
cover with the slots in the base of the unit.
f. Rotate the filter cover clockwise until it locks
into place.
g. Turn unit right side up.
2. Connect the power cord into the inlet on the
bottom of the air purifier. Be sure it is plugged
all the way in. Your purifier is now ready for use.
WARNING: This appliance has a polarized
plug (one blade is wider than
the other). To reduce the risk
of electrical shock, this plug is
intended to fit in a polarized
outlet only one way. If the plug
does not fit fully in the outlet,
reverse the plug. If it still does
not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
4
AIR OUTLET
AIR INLET
POWER CORD
FILTER COVER
FILTER
POWER CORD INLET
BOTTOM OF MACHINE
CONTROL
PANEL