Editing effects (EDIT mode)
In EDIT mode, you can change the effects used in a patch and adjust their parameters.
Select a patch in MEMORY mode beforehand to edit it in EDIT mode.
1.
Activate EDIT mode.
• Press
Unit number
2.
Select an effect to edit.
• Press
–
3.
Turn the effect ON/OFF.
• Press the same
2 again.
4.
Adjust the effect parameters.
If an effect has 5 or more parameters, use
NOTE
When the AUTO SAVE function is ON, changes to effects will be automatical-
ly saved. (
.
Effect name
Parameters
.
–
as in step
OFF
P .10)
1
4
2, 3
ON
to change the screen.
5