Advertisement
Congratulations & Introduction
PHONO 2
Italian Pr estige phono stage
-
PHONO PREAMPLIFIER COMPLETE OF AC POWER CHORD
-
INSTRUCTIONS AND WARRANTY CERTIFICATE.
The PHONO 2 Phono stage has been designed for use in Hi-Fi systems in sheltered locations. It ought therefore to be protected from any
eventual variations in temperature and humidity. Avoid using in the vicinity of radiators or other strong heat sources, electrical and electronic
motors, switched on mobile phones etc.
The location in proximity of other audio components is not theoretically critical, but you should nevertheless pay attention to this. If the
turntable should have to be moved after the Phono stage has been installed, certain readjustments may need to be made. In any cas e, take care
to lock the PHONO 2 Phono stage every time you need to move it, or to move the turntable on which it is installed.
Once it has been correctly mounted on your turntable, and once the supplied cable linking the connect or located on the bottom of the Shaft and
the amplifier to the PHONO input set for the pre -installed cartridge has been connected, your PHONO 2 Phono stage is ready for use.
NOTE: Never disassemble any part of the product for any reason whatsoever. The PHONO 2 Phono stage could be irreparably
damaged and the guarantee would be invalidated.
Contents of Packaging
Positioning of the PHONO 2 Phono Stage
Operating Conditions
3
Hide quick links:
Advertisement
