Unit Description; Specifications - Shindaiwa PowerBroom PB2500 Operator's Manual

Unit Description

Using the accompanying illustrations as a
guide, familiarize yourself with this unit
and its various components. Understand-
ing the product helps ensure top perform-
ance, long service life, and safer opera-
tion. See Figure 4.
WARNING!
Do not make unauthorized modifica-
tions or alterations to this unit or
components.
Prior to Assembly
Before assembling, make sure you have
all the components required for a com-
plete unit:
■ Engine assembly
■ Outer tube assembly
■ Drum kit w/gearcase
■ Correct operators handle (see preced-
ing page)
■ Kit containing operator's handle and
hardware, this manual and tool kit for
routine maintenance. Tool kits vary by
model and may include a hex wrench,
spanner and a combination spark plug
wrench/screwdriver.
Carefully inspect all components for
damage.
IMPORTANT!
The terms "left", "left-hand", and "LH";
"right", "right-hand", and "RH"; "front"
and "rear" refer to directions as viewed
by the operator during normal operation.
6
Sweeper
Outer Tube
Belt
Gearcase
Figure 4

Specifications

PB2500 Dry Weight (less sweepers) ............................................................ 4.7 kg/10.4 lb.
PB2500 Dry Weight (Including sweepers) .................................................. 9.5 kg/21.0 lb.
Engine Model ........................................................................................ Shindaiwa SF2500E
Engine Type ..................................................... Shindaiwa C4, vertical-cylinder, air-cooled
Bore x Stroke .................................................................................. 34 x 27 mm/1.3 x 1.1 in.
Displacement ............................................................................................. 24.5 cc/1.5 cu. in.
Maximum Power Output .......................................... 1.1 HP (0.8 kW) @ 7500 rpm (min
Fuel/Oil Ratio ........................................ 50:1 with Shindaiwa Premium 2-cycle mixing oil
Fuel Tank Capacity ....................................................................................... 600 ml/20.3 oz.
Carburetor Type ................................................................... Walbro WYL, diaphragm-type
Ignition ............................................................. One-piece electronic, transistor-controlled
Spark Plug ......................................................................................................... NGK CMR6H
Air Cleaner Type ..................................................... Non-reversible flocked filter element
Starting Method ............................................................................................................ Recoil
Stopping Method ................................................................................................. Slide switch
Transmission Type ............................................ Automatic, centrifugal clutch w/worm gear
EPA Emission Compliance Period* ................................................................... Category A
*The EPA emission compliance period referred to on the emission compliance label located on the engine, indicates the
number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50
hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended)
*Specifications are subject to change without notice.
Handle
Ignition
Switch
Throttle
Trigger
PB03
Sweeper
Drum
Spark
Plug
Grip
Fuel
Tank
Tank
Protector
-1 )