Every 200 Hours; Checking Radiator Hose And Clamp; Checking Hydraulic Hose; Checking Intake Air Line - Kubota G2160E Operator's Manual

Table of Contents

Advertisement

EVERY 200 HOURS

BChecking Radiator Hose and Clamp
Check to see if radiator hoses are properly fixed every 200
hours of operation or 6 months, whichever comes first.
1. If clamp bands are loose or water leaks, tighten bands
securely.
2. Replace hoses and tighten clamp bands securely, if
radiator hoses are swollen, hardened or cracked.
(1) Radiator core
(2) Radiator hose
PERIODIC SERVICE
BChecking Hydraulic Hose
To avoid personal injury:
A Be sure to stop the engine and remove the key
before checking and replacing hydraulic hose.
A Allow
transmission
sufficiently; oil can be hot and may cause
burns.
Check to see if hydraulic hoses are properly fixed every
200 hours of operation.
1. Check to see that all lines and hose clamps are tight
and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Mower lift cylinder hose
BChecking Intake Air Line
1. Check to see that hoses and hose clamps are tight and
not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Hose
(2) Clamp
37
case
to
cool
down

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G2160-2Rck54-24g

Table of Contents