Table of Contents
Advertisement
is "NVC_XXXXX" (for example, "NVC_4DF8F" in the following screenshot), where "XXXXX" is a
device-generated text string.
One can also configure Hotspot's RF channel and its routing behavior with LAN. As shown in
the figure below,
You can change the RF channel to avoid unnecessary radio interference, as explained in
Section 1.4.
"Enabling LAN-Wi-Fi-Hotspot routing" gives you the option to either keep LAN and Wi-Fi
Hotspot completely isolated, or, allow Wi-Fi Hotspot to piggyback to the LAN for
Internet access.
V1.0
Network Deployment Guide for NovoConnect
Hotspot AP IP address
Hotspot AP SSID
Page 6 of 18
Advertisement
Table of Contents
