Vivitek NovoConnect Deployment Manual page 3

"DHCP" is the default connection type. However, "Static IP" might be more preferable as it makes
remote management much easier.
The following diagram illustrates how to select one of these two connection types. (Settings 
General Settings  Ethernet  Ethernet Configuration).
1
To set up "Static IP" properly, you
need to have the
information, as shown in the diagram
on the right.
 An unallocated IP address;
 Netmask;
 DNS address;
 Gateway address.
V1.0
following
Network Deployment Guide for NovoConnect
2
Page 3 of 18