Vivitek NovoConnect Deployment Manual page 5

Logging into a Wi-Fi Network with 802.1x Authentication:
When you connect to a Wi-Fi network with 802.1x
authentication (for example, radius server), you will need to
enter the following fields to set up the connection properly:
 Network SSID  Your network
 Security  802.1x Enterprise
 Choose the correct settings for
o EAP method
o Phase 2 authentication
 Identity  Your username (such as
DOMAIN\John.Smith
 Password  Your password
Click on button "Connect" to start the connection.
1.3. Wi-Fi Hotspot Mode
A newly unpacked NovoConnect device starts up in Wi-Fi Hotspot mode, where you can start
using it without any entanglement with the network setup. The default SSID for this Wi-Fi Hotspot
V1.0
)
Network Deployment Guide for NovoConnect
Page 5 of 18