Table of Contents
Advertisement
remote-manager-ip-address*
remote-manager-port-number*
report-time-interval*
Note:
(1) Settings marked with "*" are supported in NovoConnect software release V2.2 and above.
(2) Regarding "remote-manager-port-number", you can change this port number of your
Remote Manager via menu "Preference", as illustrated in the figure below.
6. An example of a NovoAutoConfig.xml file is as follows:
Apply the customized NovoConnect settings to a NovoConnect device:
V1.0
Network Deployment Guide for NovoConnect
(0.0.0.0)
20142
15
IP address of the computer Remote Manager
runs on
The port number used by Remote Manager to
listen to device reporting. 20142 is the default
port number. You may need to change it to
match your Remote Manager's setting.
The time interval (in seconds) for a
NovoConnect device to report its existence to
Remote Manager.
Page 17 of 18
Advertisement
Table of Contents
