Sony IPELA PCS-RS Operating Instructions Manual page 16

Setting item
Screen layout Specify the H.239 screen layout used during
Title
Comment
2
Select the entry method, and enter the H.323 alias, E.164 number, or IP
address for the meeting in the entry field.
3
Click the [Start] button.
When recording starts, information on the called meeting is displayed in a
list on the monitor used for viewing recording sessions. If it is not
displayed, the meeting has not been called properly. Check the information
entered in step 2 in such cases.
Note
When recording a meeting, the HD RECORDING SERVER connects to the meeting as
one of its participants.
As a result, proper recording may not be possible under some conditions.
• Recording will not start if the access permission for a meeting is not granted or if the
maximum number of participants for the meeting will be exceeded by calling the HD
RECORDING SERVER.
• When the HD RECORDING SERVER is registered as a user, recording will start but
only the audio will be recorded if the [Max Bandwidth] setting in the registered user
information does not meet any of the bandwidths in a mixed-speed connection or if a
video codec that is not supported by the HD RECORDING SERVER is being used.
• If an audio codec that is not supported by the HD RECORDING SERVER is being
used, recording will start but only the video will be recorded.
• If both the video codec and audio codec are not supported by the HD RECORDING
SERVER, recording will start but a recording file will not be created.
16
Recording Meetings via RSOnline
Description
recording.
H.239 MAIN: Displays H.239 content in 3/4 of
the recorded screen layout when H.239 content
sharing is used.
H.239 HALF: Displays H.239 content in the
right half of the screen layout when H.239
content sharing is used.
Enter a title for the recording file.
The title field will be empty if an entry is not
made. If an entry is not made before recording
starts, you can still edit the field in the [Video
Archive] screen after recording is finished.
The following symbols cannot be entered: < > "
' ! \ & , $
Enter a comment for the recording file.
The comment field will be empty if an entry is
not made. If an entry is not made before
recording starts, you can still edit the field in the
[Video Archive] screen after recording is
finished.
The following symbols cannot be entered: < > "
' ! \ & , $
Maximum value
50 characters
128 characters