Sherwood RD-7503 Operating Instructions Manual page 43

RD-7503(A) 2008.11.4 1:45 PM 페이지 43
Continued
②. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired tone mode.
③. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the selected tone as desired.
■When selecting the CINEMA EQ
OFF : To turn off the cinema EQ function.
�
ON : To compensate for edgy or shrill movie sound tracks.
■When selecting the MOMENTARY OSD
ON : To turn on the OSD function that shows the status corresponding to each operation on this unit momentarily.
�
OFF : To turn it off.
■Note :
• The OSD menu and the momentary OSD can be displayed via the (composite) VIDEO MONITOR OUT only.
• The tone level can be adjusted within the range of -10 ~
+10 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
• To complete tone adjustment, repeat the above steps ②
and ③.
43