Sherwood RD-7503 Operating Instructions Manual page 30

RD-7503(A) 2008.11.4 1:45 PM 페이지 30
Manual presetting
• You can store up to 30 preferred stations in the memory.
1.
Tune in the desired station with auto or manual
tuning.
2.
Press the (MEMORY/)ENTER button.
• "MEM" is flickering for several seconds.
3.
Select the desired preset number (1~30) and
press the (MEMORY/)ENTER button.
• The station has now been stored in the memory.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If "MEM" goes off, start again from the above step 2.
4.
Repeat the above steps 1 to 3 to memorize
other stations.
�
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off,
are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations,etc.
Tuning to preset stations
• After selecting the tuner as an input source, select the
desired preset number.
MEM
30