Sherwood RD-7503 Operating Instructions Manual page 28

RD-7503(A) 2008.11.4 1:45 PM 페이지 28
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the
memorized whenever you want.
1.
After performing the steps 1~4 in "Adjusting the current channel level" procedure on page 27, press the
(MEMORY/)ENTER button.
2.
Select the desired one of REF 1 and REF 2.
3.
Confirm your selection.
Recalling the memorized channel levels
1.
Press the CHANNEL LEVEL button.
2.
Select the desired one of REF 1 and REF 2.
• The "1" of "REF 1" indication flickers for several
seconds.
• If the preset memory disappears, perform the above
step 1 again.
• The adjusted channel levels have now been
memorized into the selected memory.
• "CAL" (or "REF 1", etc.) is displayed for several seconds.
• If the memory mode disappears, press this button again.
• Then the channel levels memorized into the selected
preset memory are recalled.
28