How To Insert The Mixing Bowl Correctly - Vorwerk Thermomix TM5 Instruction Manual

BEFORE YOU START

How to insert the mixing bowl correctly

To avoid scalding, burn injury and
laceration hazard:
• Only open the mixing bowl lid when the speed is set to "0" and the
locking mechanism has released it.
• To prevent splashing, use the measuring cup, simmering basket or Varoma
dish to cover the hole in the mixing bowl lid. The safety function can only
be ensured when original Thermomix® TM5 accessories are used. Ensure
that the accessories or hole in the mixing bowl lid are not covered or
blocked from the inside or outside by a towel or suchlike.
• Do not let the power cord hang over edge of table or counter, or touch
any hot surface, such as a stove.
• Do not touch the surface of the mixing bowl or parts of the mixing bowl
lid, Varoma or measuring cup as they will become hot when processing
hot food.
• Do not disassemble the mixing bowl while it is hot.
The locking mechanism can pinch your fingers.
• Avoid contact with moving parts. Never touch the locking arms or
mixing bowl lid when opening or closing the Thermomix® TM5.
• Make sure the appliance is switched off and the locking mechanism
released before removing or attaching accessories.
• Keep hair and clothing away from moving parts of the Thermomix® TM5.
Insert the mixing bowl with the handle pointing to the front and place it
gently into position 1 .
The mixing bowl has been inserted correctly if its handle is at the front, as shown
in picture 1 , and if the bowl itself is securely fixed in the Thermomix
close the mixing bowl place the mixing bowl lid vertically onto the mixing bowl
2 . The lid will lock automatically when the motor is active.
20 Before you start
WARNING
CAUTION
TM5. To
®
1
2