2-Channel Amplifier Ve 900.2 & 1500.2 - ESX VISION2 Series Owner's Manual

FUNCTIONS & CONTROLS TOP-PANEL
2-Channel Amplifier VE1000.2 / VE1800.2
F1
LINE OUTPUT
Provides a full range line level (RCA) output that allows you to trigger additional amplifiers.
F2
LINE INPUT
This allows you to connect the head unit outputs (CH 1/2 or CH 3/4) by appropriate RCA cables.
F3
BALANCED INPUT
Accepts a balanced symmetrical line signal from a appropriate Signal Transmitter. (See page 32)
F4
REMOTE
Terminal for the included REMOTE CONTROL to adjust the Bass Level.
F1
R1
R1
FUSE
Fuse block to prevent damages of the amplifier (See page 20).
R2
BATT +12V
Terminal for the plus connection (See page 20).
R3
REM
Terminal for remote turn-on of the head unit (See page 20).
R4
GROUND
Terminal for the ground/minus connection (See page 20).
R5
SPEAKER OUTPUT
Terminal for the left and right speaker or bridged subwoofer (MONO mode).
Attend the several examples for Loundspeaker Wiring on the following pages!
F2 F3
R3
R4
R2
21
F4
R5