Digital Contact Open & Closed (Callpoints); Smoke & Heat Detectors - GasTech GTA-4100R Operator's Manual

3.4.5 Digital Contact Open & Closed (Callpoints)
This diagram shows how to connect callpoints to the GTA-4100R.
In this configuration, the DIP switches and jumper settings should be set as shown below.
3.4.6 Smoke & Heat Detectors
This diagram shows how to connect smoke or heat detectors to the GTA-4100R. Multiple detectors can be
wired in parallel if required.
In this configuration, the DIP switches and jumper settings should be set as shown below.
Page 32 © 2008 GasTech Australia Pty Ltd