Table of Contents
Advertisement
In the case above, display channel 4 is showing the sum of display channels 1, 2, and 3.
The configure project window below is where the display channels are set up.
As shown, hovering over an area within the window gives tool-tip help which, with the online help should provide
enough information to aid setup.
To summarise, select the number of display channels required, assign Data Tags to the expression section
(ensuring that they are enclosed in triangular brackets, <FF69>) and change any other parameters as
necessary.
The triangular brackets allow the expression field to identify the Data Tag for what it is.
10
Mantracourt Electronics Limited
BroadWeigh Original Instructions
Advertisement
Table of Contents
