ABB MB3000 Series Installation And User Manual page 2

ABB Bomem Inc.
This Guide and the accompanying software are copyrighted and all rights are reserved by ABB.
This product, including software and documentation, may not, in whole or in part, be copied, pho-
tocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form
without prior consent, in writing, from ABB Disclaimer
This document contains product specifications and performance statements that may be in conflict
with other ABB Inc. published literature, such as product flyers and product catalogs. All specifi-
cations, product characteristics, and performance statements included in this document are given
as suggestive specifications only. In case of conflict between product characteristics given in this
document and specifications given in the official ABB Inc. Product Catalogs, the latter take pre-
cedence.
ABB Inc. reserves the right to make changes to the specifications of all equipment and software,
and contents of this document, without obligation to notify any person or organization of such
changes. Every effort has been made to insure that the information contained in this document is
current and accurate. However, no guarantee is given or implied that the document is error-free or
that the information is accurate.
ABB Inc. makes no representations or warranties with regard to the product and instructional and
reference materials, including, but not limited to, all implied warranties of merchantability and fit-
ness for a particular purpose.
ABB Inc. does not warrant, guarantee, or make any representations regarding the use, or
the results of the use, of any software or written materials in terms of correctness, accuracy,
reliability, currentness, or otherwise. ABB Inc. shall not be liable for errors or omissions con-
tained in its software or manuals, any interruptions of service, loss of business or anticipa-
tory profits and/or for incidental or consequential damages in connection with the
furnishing, performance or use of these materials even if ABB Inc. has been advised of the
possibility of such damages.
All equipment, software, and manuals are sold as is. The entire risk as to the results and perfor-
mance of the equipment and software is assumed by the user.
The software or hardware described in this document is furnished under a license and may be used,
copied, or disclosed only in accordance with the terms of such license.
Copyright © 2008 by ABB.
All rights reserved.
May 2008
AA003700-01 rev. G. 2.0
All Rights Reserved.