Samsung SGH-I600 Service Manual page 30

1) Connect the WHEEL KEY to the
5
connector on the PBA.
2) Screw six points in the WHEEL KEY
and the PBA.
1) Press WHEEL KEY connector so that is sonant
'Exactly' vertically.
2) Notice that components around the screw should
not be in damage.
※ WHEEL, PBA screw spec. : M1.4, L3
7
1) Attach the VOLUME KEY and POWER
KEY F-PCB in accordance with the groove.
1) Observe as KEY tension can grow worse in case
of escapes and attaches groove.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View/Disassembly&Assembly Instructions
6
1) Assemble the 1.3M CAMERA BRACKET.
2) Screw two points in the CAMERA
BRACKET.
1) Notice that components around the screw should
not be in damage.
※ 1.3M CAMERA BRACKET screw spec. : M1.4, L4
8
1) Check the Front Case and the PBA set.
1) Check the RECEIVER and KEY PAD setting.
5-9