Samsung SGH-I600 Service Manual page 29

Exploded View/Disassembly&Assembly Instructions
― Assembly
1
1) Connect the 1.3M and VGA CAMERA
to connector on the PBA.
3
1) Attach the LCD connector and the
INTENNA connector.
1) Notice that components around the connector
should not be in damage.
2) Press connector so that is sonant 'Exactly'
vertically.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Put PBA for shield-can.
1) Notice that KEY connector, INTENNA cable, and
LCD connector should not enter through PBA and
shield-can.
4
1) Connect the KEY F-PCB and attach the
insulation tape on the connector.
1) Put deeply KEY connector so that reach to white
line.
2) Insulation tape covers whole so that connector
may not come out.
5-8