Samsung SGH-I600 Service Manual page 27

Exploded View/Disassembly&Assembly Instructions
1) Unscrew six points in the WHEEL
9
KEY and the PBA.
2) Disjoint the WHEEL KEY connector.
1) Notice that components around the screw should
not be in damage.
2) Notice that the WHEEL KEY F-PCB should not be
in damage.
※ WHEEL, PBA screw spec. : M1.4, L3
11
1) Detach the POWER KEY and VOLUME
KEY F-PCB using the tweezers.
1) Notice that the double-side tapes and shield-can
should not be in damage.
2) Notice that the F-PCBs should not be in damage.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1) Disjoint the INTENA connector.
10
2) Disjoint the LCD connector.
1) Notice that the connectors and other components
should not be in damage.
12
1) Detach the KEY F-PCB connector
insulation tape using the tweezers.
2) Disjoint the KEY F-PCB connector.
1) Notice that the KEY F-PCB should not be in
damage.
5-6