Daily Timer Indicator; Timer Play Indicator; Timer Recording Indicator - Sharp XL-HP707 Operation Manual

Sharp micro component system operation manual xl-hp707
Hide thumbs Also See for XL-HP707:
Table of Contents

Advertisement

Timer and sleep operation (continued)
XL-HP707
4
Within 10 seconds, press the
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
5
Press the
"REC", and press the MEMORY/SET button.
The illustrations show the daily timer setting.
6
Press the
or
then press the MEMORY/SET button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7
Press the
or
then press the MEMORY/SET button.
8
Set the time to finish as in steps 6 and 7 above.
28
or
button to se-
or
button to select "PLAY" or
White
button to adjust the hour and
button to adjust the minutes and
9
Switch input with the
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER or TAPE.
To select the timer recording source: TUNER.
" When you select the tuner, select a station by pressing the
or
button, and then press the MEMORY/SET
button.
" If a station has not been programmed, "NO P.SET" will be
displayed and timer setting will be canceled.
Red
10
Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
or
button, and then

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-hp707

Table of Contents