Daily Timer Indicator; Timer Play Indicator; Timer Recording Indicator - Sharp CD-ES9 Operation Manual

CD-ES900
Timer and sleep operation (continued)
CD-ES99
4
Within 10 seconds, press the
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
5
Press the
"REC", and press the MEMORY/SET button.
The illustrations show the daily timer setting.
6
Press the
then press the MEMORY/SET button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7
Press the
then press the MEMORY/SET button.
8
Set the time to finish as in steps 6 and 7 above.
28
or button to se-
or button to select "PLAY" or
White
or button to adjust the hour and
or button to adjust the minutes and
9
Switch input with the
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
" When you select the tuner, select a station by pressing the
or
button.
" If a station has not been programmed, " NO P.SET" will be
Red
displayed and timer setting will be canceled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
or button, and then
button, and then press the MEMORY/SET