Functional Check; Using The Appliance; Controls; Setting Up The Hm-12/Hm-22/Hm-22A/Hm-22B For Use - iMettos HM-12 Instruction Manual

4.3 FUNCTIONAL CHECK

To check the appliance works correctly proceed as follows:
 Turn to the place of "on" and check that the screw feeder rotates anti-clockwise to the outlet
opening of the HM-12/HM-22/HM-22A/HM-22B;
 Turn to "off", The appliance stop work;
 If the appliance automatically stops. Press the reverse button "turn over" check the screw feeder
changes direction and starts turning clockwise.

5.1 CONTROLS

FIG 4-Controls
1-Start button "on"
2-Stop button "off"
3-Reverse button "turn over"
5.2 SETTING UP THE HM-12/HM-22/HM-22A /HM-22B FOR USE
N.B before using the appliance makes sure all the components that can be removed are secured in
position (see fig 6)

Mount the mincer outlet and block it into position using the handle located on the side of the union;

Mount the screw feeder, blade and disk, and then screw on the lock nut.

5.3 FILLING THE MINCER(see fig5)

When using the mincer it is important that you stand in the correct position. Do not position yourself
so that any part of your body comes In direct contact with the mincer when working.
FIG 5-fitting the mincer
N.B The mincer must be filled when working. The
procedure to follow is:
1. Place the food in the tray;
2. Start the mincer using the start button.
3. Raise the pestle; feed the meat into the
tube; Without forcing use the pestle to push
the meat into the opening.

5 USING THE APPLIANCE

4-stop button (red)
5-start button (green)
7