Information About The Appliance; General Warnings; Safety Features Installed; Appliance Description - iMettos HM-12 Instruction Manual

1.1 GENERAL WARNINGS


The appliance must only be used by personnel who has carefully studied this manual and
understood all the safety standards described herein.

If there should be a turnover in personnel, it is necessary that this manual is carefully studied
before using the appliance.

Although safety devices are installed on the appliance, avoid touching the moving parts with your
hands and avoid touching the appliance with wet hands.

Before cleaning or servicing the appliance, disconnect the electricity power supply.

When cleaning or servicing the HM-12/HM-22/HM-22A /HM-22B(safety protections removed) take
into consideration all possible hazards-Residual Risks.

When cleaning or servicing the appliance always concentrate on what you are doing and avoid
any possible distractions.

WARNING - The machine should be repaired by manufacturer or agent if the machine faults.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.

Check the electricity power cable on a regular basis (to avoid electrical hazards and twists in the
cable always completely
hazard;avoid pressing the cable with weights or leaving it on hearted or sharp cutting Surfaces and
avoid pulling the cable to remove the plug from the socket.

If the HM-12/HM-22/HM-22A/HM-22B has a presumed malfunction or does not work correctly, do
not use it or repair it. Contact the "Service Centre".

This appliance is designed for only mincing meat in the mincer.Do not use this appliance for
frozen food or non-food products and do not insert any metallic objects into the mincer .

Do not mince without using the pestle
The manufacturer cannot be held responsible for the following situations:

If the appliance or safety devices are tampered with by unauthorized personnel;

If non-original spare parts are used;

If the instructions given in this manual are not carefully followed or respected;

If unsuitable cleaning products (inflammable, corrosive or toxic) are used to clean the appliance.
1.2

SAFETY FEATURES INSTALLED

Safety features against electrical hazards conform to standards IEC/EN60335-2-64, whereas
mechanical safety features conform to EN/IEC60335-2-64 .
The HM-12/HM-22/HM-22A /HM-22B is fitted out with:
Relay in the command circuit for restarting the appliance if there if there is a power cut;
The HM-12/HM-22/HM-22A/HM-22B is fitted out with electrical and mechanical safety protections that
conform to the standards in force .These protections are for when the appliance is working and when it
is being cleaned or serviced .However ,there are RESIDUAL RISKS that cannot be completely
eliminated and are indicated by the wording CAUTION in this manual. These risks refer to the risk of
being cut or injured when handling the blade on the HM-12/HM-22/HM-22A/HM-22B while cleaning.
1.3

APPLIANCE DESCRIPTION

1.3.1 GENERAL DESCRIPTION


We have designed and manufactured the HM-12/HM-22/HM-22A/HM-22B guaranteeing;

1 INFORMATION ABOUT THE APPLIANCE

unwind it);a worn or damaged cable causes a dangerous electrical
3