2 Basic Functions
2.1 Call MGT center
In the standby status (Error! Reference source not found.), press
button, this VTO
ill call the MGT center. The video door phone begins when the MGT Port picks up. During
the whole process, you can press the button
to end current dialogue and return to the
standby interface.
2.2 Call Users
2.2.1 Call Status
,you can
In the standby status, input the room number and then press the button
generate a call to the VTH of the user. During the process, you can press the button
to end current dialogue and return to the standby interface.
2.2.2 Communication status
After you generated a call to the VTH, if there is response, you can enter communication
status. It can realize the dual-way video phone. During the process, you can press the
button
to end current dialogue and return to the standby interface.
2.3 Monitor Function
The MGT Port and the VTH can both enable the monitor function which turns on the
camera and monitors the device video.
www.prolynx.ae