Table of Contents
Advertisement
3.2.3 VTH Management
VTH management mainly includes add digital VTH, delete VTH and edit VTH user.
3.2.3.1 Digital VTH Management
In digital VTH management interface, check box display resident info enable to display
successfully configured VTH info as shown in Figure 3- 6. Click on add button at the left
lower corner, and input user name and VTH number. Please be notified that only VTH
number is required for operation as default.
Figure 3- 6
LAN Setting
Default setting is enough if you just want networking between VTO and VTH, but if you
want to set MGT center, you need to change default settings to be identical with MGT
center info. You also need to check box register to the MGT center.
If you successfully set MGT center, you may call MGT center by pressing call MGT center
button at lower left corner on VTO. Please see Figure 3- 7.
www.prolynx.ae
Advertisement
Table of Contents
