Table of Contents
Advertisement
2.6 Access Control (A&C) Function
The device can connect 1-channel door sensor input. It can be used to detect door status.
There is 1-channel door on-off button to open/close the door.
It has 2-channel control output. There are two modes: NO/NC. It can also be used for
other general controls. Please refer to later sections for detailed information.
2.7 Vandal Proof Function
There is 1-channel vandal proof button. System can generate an alarm once it is removed
from the wall. At the same time, it can upload the alarm information to the MGT center.
2.8 Approaching Induction
When there is any body approaching the VTO at a distance about 1 meter, screen
backlight will be ON.
3 Web Function
3.1 Overview
The web-based interface is shown in Figure 3- 1.
www.prolynx.ae
Advertisement
Table of Contents
