Table of Contents
Advertisement
Quick Links
4. Attach the Display to the VESA Plate
TV
TV
TV
M-A
M-B
M-C
Lift the display and match the holes on your display with the
hole on the mount. Secure your display to the mount by
tightening screws.
Tighten all screws but do not over tighten.
5. Adjustment
360°
0°~-110°
For saving the space, you can fold display by pushing display back until it fits in place.
Maintenance
• Check that the bracket is secure and safe to use at regular intervals(at least every three months).
• Please contact your dealer if you have any questions.
7
B
Adjust to desired location.
Under-cabinet / Ceiling Mount
50x50
PID 5754
75x75
100x100
INSTALLATION INSTRUCTIONS
CAUTION:
DO NOT EXCEED MAXIMUM
LISTED WEIGHT CAPACITY. SERIOUS
INJURY OR PROPERTY DAMAGE MAY
OCCUR!
23"
8kg
8kg
MAX
(17.6lbs)
(17.6lbs)
MAX
MAX
ISSUED: NOV. 2012
Advertisement
Table of Contents
Related Manuals for Monoprice 5754
Summary of Contents for Monoprice 5754
- Page 1 LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! For saving the space, you can fold display by pushing display back until it fits in place. 50x50 23″ PID 5754 75x75 Maintenance 100x100 (17.6lbs) (17.6lbs) • Check that the bracket is secure and safe to use at regular intervals(at least every three months).
- Page 2 Component Checklist NOTE: Read the entire instruction manual before you start installation and assembly. IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, telephone your local distributor for a replacement. WARNING •...
- Page 3 3a. Mount on Wooden Ceiling 50mm 50mm (2”) (2”) Align both holes of ceiling plate to screws in ceiling and move the ceiling plate until both screws are seated in small area of ø 4mm (ø 5/32”) tear-drop mounting holes. Find and mark the exact location of mounting holes.
- Page 4 3b. Mount on Solid Brick and Concrete Block 60mm 55mm (2.4") (2.2”) Align both holes of ceiling plate to screws in ceiling and move the ceiling plate until ø 8mm both screws are seated in small area of (ø 5/16”) tear-drop mounting holes.
Need help?
Do you have a question about the 5754 and is the answer not in the manual?
Questions and answers