Cleaning; Troubleshooting; Safety Notices - CASO DESIGN VC350 Original Instruction Manual

Vacuum sealer system

Hide thumbs Also See for VC350:

Table of Contents

Attention

► Clean the unit after every use as soon as it has cooled. Leaving the unit uncleaned for

long periods can make it very difficult to remove leftover food and grime and may even

damage the unit.

► If moisture penetrates the unit's housing, it can damage the electronic components.

Please ensure that no moisture enters the device.

► Do not use any harsh or abrasive cleaning agents.

► Do not attempt to scrape off stubborn grime with hard or abrasive tools.

► Dry all parts thoroughly before using after cleaning.

► Do not immerse the unit in water or other liquid.

6.2 Cleaning



Outside of the unit

Wipe with a damp cloth or sponge and mild dish soap.



Inside of the unit

Wipe away any food or liquids with a paper towel.

Warning

► Bags used to store raw meats, fish or greasy foods should never be reused due to risk of

contamination.



Sealing profile (which presses the bag against the sealing bar)

Remove the sealing profile and clean it in warm soapy water.

Please note

► The sealing profile should be cleaned thoroughly before installing it again.

► Be careful during re-installation, so that nothing will be damaged and sealing profile is

placed well so that the device can work properly.

The following table may help you narrow down and address minor malfunctions:

Warning

► Only qualified electricians, who have been trained by the manufacturer may carry out any

repairs on electrical equipment.

► Improperly performed repairs may result in personal injury or damage to the device.

Table of Contents