AVS Bugflector Installation Instructions

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Raise hood and clean the leading edge thoroughly,
1

Installation Instructions

®
- Bugflector II
Hood shield
Clean Towel
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
and allow to dry.
® ®
- Carflector - Chrome Hood Shield
Screw
x 6
Phillips
screwdriver
Test fit hood shield by centering it on the hood edge.
Note where the mounting holes in the hood shield flange
2
Page 1 of 2
I - Sheet Number BF119
Receptacle Bump On
x 6 x4
Grease Pencil
will be and mark with a grease pencil.
™