Display - E.F. Johnson Company 51 Series Preliminary Operation Manual

CONTROLS AND DISPLAY

Display

Tx Pgm SL Pri Scan
Sec Dig Rx Call ID
Alphanumeric Display
The front panel display is shown above, and the following informa-
tion is indicated:
Alphanumeric Characters - This area of the display indicates the
selected channel, error conditions, and other information.
Sec - Indicates that transmissions are encrypted (see page 28).
Dig - Indicates that a digital (Project 25) conventional channel is selected.
Rx - Indicates that a carrier is being detected on the selected or scanned
channel.
Tx - Indicates the transmitter is keyed.
Pgm - Indicates that the keypad programming mode is selected (see
page 40).
SL - Indicates that the displayed channel is in the scan list (see page 25).
Pri - Indicates that the displayed channel is programmed as the current
group's priority channel (see page 36).
17