auna 10031949 Manual page 30

EN
30
Note: If the unit cannot receive any DAB+ signal, you can set the
clock manually. Once the DAB+ signal is received, the time will be
automatically updated.
Setting the Daily Timer
1 Press and hold the TIMER button on the remote control until the display
shows "On Timer", and the hour digits flash.
2 Press the |<< or >>| buttons to adjust the hour digits, and then press the
TIMER button to confirm. The minute digits will flash on the display.
3 Press the |<< or >>| buttons to adjust the minute digits, and then press
the TIMER button to confirm.
4 When the |<< or >>| On Timer Clock set is set, the display will show
"Off Timer" and the hour digits will flash.
5 Press the |<< or >>| buttons to adjust the hour digits, and then press the
TIMER button to confirm. The minute digits will flash on the display.
6 Press the |<< or >>| buttons on the remote control to adjust the minute
digits, and then press the TIMER button to confirm.
7 Press the buttons to select DAB, FM, DISC or USB mode, then press the
TIMER button to confirm. The display will show "VOL#" and flash. Press
the |<< or >>| buttons to adjust the volume, and then press the TIMER
button to confirm.
8 Press the TIMER button to select „Timer On", and the Timer is now set.
9 In standby mode, the CLOCK icon will show on the display to indicate
the Timer is On.
To cancel the Daily Timer
Press the TIMER button on the remote control repeatedly to select Time Off
mode. The CLOCK icon will disappear from the display.