Adjusting The Projected Image ("Scr - Adj" Menu); Setting The Resize Mode; Adjusting The Image Position; Keystone Correction - Sharp XG-MB55X-L Operation Manual

Adjusting the Projected Image
("SCR - ADJ" menu)

1 Setting the Resize Mode

1 1
1 1
Note
• For details of the Resize mode, see pages
and 33.
• You can also press HRESIZE on the remote
control to set the resize mode. (See page 32.)
2 Adjusting the Image
2 2
2 2
Position
You can move the projected image vertically.
O button
Note
• You cannot set this item when "Resize" is set
to "Normal".
Picture SCR - ADJ
1 Resize
2 Image Shift
3 Keystone
Auto Keystone
4
OSD Display
5
Background
6
Setup Guide
7
PRJ Mode
8 Language
SEL./ADJ.
"Auto Keystone" can be operated only when using XG-MB65X-L or XG-MB55X-L
*
32
Q button
Menu operation n Page
PRJ - ADJ Help
Normal
0
0
Off
On
Logo
On
Front
English
ENTER END

3 Keystone Correction

3 3
3 3
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.
a When using XG-MB65X-L or XG-MB55X-L
For Auto Keystone Correction
Set "Auto Keystone" on the "SCR - ADJ"
menu to "On".
For Manual Keystone Correction
Set "Auto Keystone" on the "SCR - ADJ"
menu to "Off", select "Keystone", and
then adjust with the slide bar.
Manual Correction
Q button
a When using XR-10X-L or XR-10S-L
Select "Keystone" on the "SCR-ADJ"
menu and adjust with the slide bar.
See page 31 for details of Keystone Correction.
Note
• The Keystone Correction can be adjusted up
to an angle of approximately ±13 degrees
(when "Resize" is set to "Normal").
37
becomes distorted
O button
41