Table of Contents
Advertisement
Part Names
Numbers in
refer to the main pages in this operation manual where the topic is explained.
Projector (Front and Top View)
ON button
For turning the power on.
Power indicator
Illuminates red, when the
projector is in standby.
When the power is turned
on, this indicator will
illuminate green.
STANDBY button
For putting the projector into
the standby mode.
Lamp indicator
Illuminates green indicating
normal function. Replace
the lamp when the indicator
illuminates red.
Temperature warning
indicator
When the internal
temperature rises, this
indicator will illuminate red.
UNDO button
For undoing an operation
or returning to the default
settings.
25
HEIGHT ADJUST
button
25
Adjustment foot
Carrying handle
-10
34
34
37
STANDBY
83
83
39
Attaching and removing the lens cap
• Press on the two buttons of the lens cap
and attach it on the lens. Then release
the buttons to lock it in place.
• Press on the two buttons of the lens cap
and remove it from the lens.
In this operation manual, the illustration and
the screen display are simplified for explana-
tion, and may differ slightly from actual display.
35
INPUT button
For switching input mode
1, 2, 3 or 4.
38
KEYSTONE button
For adjusting Keystone or
Digital Shift setting.
50
AUTO SYNC button
For automatically
adjusting images when
connected to a computer.
42
Adjustment buttons
(', ", \, |)
For selecting menu items.
35
VOLUME buttons
For adjusting the speaker
sound level.
42
MENU button
For displaying adjustment
and setting screens.
42
ENTER button
For setting items selected
or adjusted on the menu.
26
Zoom knob
26
Focus ring
80
Intake vent
13
Remote control
sensor
Air filter/cooling
81
fan (Intake vent)
(on the bottom of
the projector)
Advertisement
Table of Contents
