Safety; Included Items - Unimac HVLP series User Manual

Electric HVLP Paint Sprayer

Safety

ATTENTION! When using power tools, the following basic safety measures are to be taken as protection against
electric shock, personal injury and risk of fire. Read and observe these instructions before using the equipment.
•
Spray materials emerge from nozzle tips under high pressure. ATTENTION! Danger of injection- Never point
the spray stream towards human beings or animals.
•
The spray gun is to be used only for paints and solvents with a 21°C flash point or higher (See information
on the material tin. Hazard class A II and A Ill permitted).
•
The spray gun is not to be used in work places covered by Ex-protection regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or artificial ventilation.
•
No sources of ignition are to be in the immediate area when spraying, e.g. open flame, cigarettes, sparks,
glowing wires and hot surfaces.
•
Before carrying out any work on the spray gun, unplug the lead from the power socket.
•
Do not use spray guns to spray flammable liquids.
•
The spray guns are not to be cleaned with flammable solvents which have a flash point under 21 °C.
•
Take precautionary measures against potential hazards from the spray liquid and follow any instructions
given on containers or laid down by the manufacturer of the liquid.
•
Do not spray any liquid of unknown hazard potential.
•
Wear a breathing mask and ear protection.

Included Items

1x
1x
Handheld sprayer with canister
Air hose
1x Base air compressor
2x Viscosity cups
1