Panasonic SR-FC108 Operating Instructions Manual page 13

What to do when...
O
OIf the suggestions on P. 22–23 do not bring about any improvement,
you can change the settings.
O
OSteps 2, 3 and 4 must each be completed within 16 seconds.
When no operation is performed for 16 seconds, the display returns
to the current time. (Setting cannot be made.)
→ Please restart the procedure.
O
OAfter the setting is completed, the display returns to the current time.
O
OTo go back to the previous setting, follow the procedure again.
If you want to change the keep warm temperature.
1
Press and set "◄" to "Quick".
O
OSelect "Quick" under "Pearl Rice" or "Jasmine
Rice".
2
Press .
You will not hear a beep.
Press .
You will not hear a beep.
Press .
3
Press .
O
OThe default setting is "74".
24
(74→76→72)
4
When it smells
Press .
Set to "76".
After 10 seconds
(Setting ends
automatically.)
When colour has changed or it is dry
Press .
Set to "72".
After 10 seconds
(Setting ends
automatically.)
If burning is a concern.
1
Press and set "◄" to "Quick".
O
OSelect "Quick" under "Pearl Rice" or "Jasmine
Rice".
2
Press .
You will not hear a beep.
Press .
You will not hear a beep.
Press .
3
Press .
Selec t "02".
Press .
4
Press .
Set to "So:Lo".
After 10 seconds
( Setting ends automatically.)
To stop the buzzer sounding
(end sound) during cooking,
reheating and cleaning.
1
Press and set "◄" to "Quick".
O
OSelect "Quick" under "Pearl Rice" or "Jasmine
Rice".
2
Press and hold down .
(for approximately 5 seconds)
O
OThis change does not switch off the button sounds.
25