Picture Adjustment ("Picture" Menu); Selecting The Picture Mode - Sharp Notevision XR-32X Operation Manual

Picture Adjustment ("Picture" Menu)

Q PAGE1
Picture SCR - ADJ
1
Picture Mode
Contrast
Bright
Color
2 Tint
Sharp
Red
Blue
SEL./ADJ.

1 Selecting the Picture Mode

1 1
1 1
Selectable
items
Standard For standard image
Presentation Brightens portions of image for
more enhanced presentations.
Movie Gives natural tint to the
projected image.
Game Gives sharpness to the
projected image.
*sRGB For high fidelity reproduction of
images from a computer.
• "sRGB" is displayed only when RGB signal is input.
• You can set or adjust each item in the "Picture" menu to your preference. Any changes you make are
retained in memory.
Note
• You can also press PICTURE MODE on the remote control to select the picture mode. (See page 33.)
• *sRGB is an international standard of color reproduction regulated by the IEC (International
Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when "sRGB" is selected.
For additional information about the sRGB function, visit "http://www.srgb.com/".
You cannot set the items, "Red", "Blue", "CLR Temp", "Bright Boost", when "sRGB" is selected.
Info
• When "sRGB" is selected, the projected image may become dark, but this does not indicate a
malfunction.
40
PRJ - ADJ Help
Standard
0
0
0
0
0
0
0
ENTER END
Description
Q PAGE2
Picture
Picture Mode
3
CLR Temp
2
Bright Boost
C.M.S. Setting
4
C.M.S.
5
Progressive
6 DNR
7 Lamp Setting
Reset
SEL./ADJ.
The default settings of each item when selecting Picture Mode
CLR Temp Bright Boost
0
0
–1
0
–
Menu operation n Page
SCR - ADJ PRJ - ADJ
Standard
0
1
On
3D Progressive
Off
Bright
ENTER
Lamp Setting
1 Bright
2 Bright
0 Eco + Quiet
1 Bright
– Bright
38
Help
END