Description (Fig. 1); Intended Use - DeWalt DWE6421 Instruction Manual

Always use NIOSH/OSHA approved respiratory protection appropriate
for the dust exposure. Direct particles away from face and body.
WARNING: ALWAYS USE SAFETY GLASSES. Everyday
eyeglasses are NOT safety glasses. Also use face or dust mask if
cutting operation is dusty. ALL USERS AND BYSTANDERS MUST
ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
• The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ................... volts
Hz ................. hertz
min ............... minutes
or DC ... direct current
................. Class I Construction
..................... (grounded)
................. Class II Construction
..................... (double insulated)
.../min .......... revolutions per minute
BPM ............. beats per minute
IPM ............... impacts per minute
SPM ............. strokes per minute
sfpm ............. surface feet
..................... per minute
.....................
A ...................... amperes
W ..................... watts
or AC .......... alternating
........................ current
or AC/DC ... alternating
........................ or direct
........................ current
n o .................... no load
....................... speed
n ...................... rated
........................ speed
.................... earthing
........................ terminal
..................... safety alert
........................ symbol
24

DESCRIPTION (FIG. 1)

WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. On/Off switch
B. Dust extraction outlet
C. Dust bag
FIG. 1
A

INTENDED USE

This sander is designed for professional sanding applications.
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
This sander is a professional power tool. DO NOT let children come
into contact with the tool. Supervision is required when inexperienced
operators use this tool.
D. Dust bag collar
E. Sanding pad
F. Strain relief
F
C
D
B
E