Description (Fig. A); Electrical Safety - DeWalt D26410 Original Instructions Manual

english
Package Contents
The package contains:
1 Random orbit sander
1 Dustbag frame
1 Dustbag
1 Sheet of sanding paper
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.

Description (Fig. A)

WARNING: Never modify the power
tool or any part of it. Damage or personal
injury could result.
1. On/off switch
2. Lock-on button
3. Speed control dial
4. Front handle
5. Sanding pad
6. Orbital travel lock button
7. Dustbag frame
8. Dustbag
INTENDED USE
Your random orbit sander D26410 has been
designed for quick sanding of wood, metal and
plastics in a professional environment.
DO NOT use under wet conditions or in the
presence of flammable liquids or gases.
These sanders are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
• Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
20
Your D WALT tool is double insulated in
e
accordance with EN60745; therefore no
earth wire is required.
WARNING: 115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen
between the primary and secondary
winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
e
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved
3–core extension cable suitable for the power input
of this tool (see Technical Data).The minimum
conductor size is 1.5 mm
2
is 30 m.
When using a cable reel, always unwind the cable
completely.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories. Be sure
the trigger switch is in the OFF position.
An accidental start-up can cause injury.
Fitting Sanding Discs (Fig. B)
The tool uses 6" (150 mm) hook and loop sanding
discs with a 6 hole dust extraction pattern.
1. Place the tool on a table, sanding pad (5) up.
2. Place the sanding disc directly on top of the
sanding pad.
3. Hold the sanding pad (5) with one hand and
align the dust extraction holes (9).
; the maximum length