Sharp DX-B350P User Manual page 133

3. Close the Offset Catch Tray cover.
4. Lift up the second lever from the top left corner of the back of the printer to open the rear
cover.
5. Remove any jammed paper. If paper is torn, check for any remaining torn pieces of paper.
The Fuser Unit is hot. Be careful not to touch it as you can get burned. Make sure that the levers
at both ends of the Fuser Unit are returned to the positions they were in before clearing the jam.
User's Guide
At the Offset Catch Tray
Clearing Paper Jams
10-11