Chapter 5. Quick reference for button combinations
To get a quick reference for button combinations, do the following:
Standby mode:
• 7+6: Read-only on
• 7+9: Read-only off
User mode:
•
+1: input the user password in force enrollment state
•
+3: set up the self-destruct password
Administrator mode:
•
+0: enter administrator mode
•
+1: create the user password
•
+2: not used
•
+3: set up the self-destruct password or performing user configuration
•
+4: set up the minimum password length
•
+5: set up brute-force attempt
•
+6: auto lock
•
+7: set up the recovery password
•
+8: input the recovery password
•
+9: input or change the recovery password
• 7+0: lock override off
• 7+1: lock override on
• 7+4: enable or disable the self-destruct password
• 7+6: read-only on
• 7+9: read-only off
• 7+8: remove the user password or self-destruct password
• 0+1: set forced enrollment
• 0+3: turn on indicator blink from standby mode
• 0+4: turn off indicator blink from standby mode
© Copyright Lenovo 2011, 2018
19